I used to create a knot at the end of a thread by taking a few centimetres at the end, folding it over into a loop and then knotting that to get a big enough knot. It used up quite a lot of thread and left me with four ends that could be caught up in my subsequent stitching.
And then at a workshop someone demonstrated a quilters knot - it was like magic, so quick and simple and I’ve not looked back!
Traditionally it is used in quilting as it is small enough to pop through one layer of fabric but big enough to say put and not pop through the second layer therefore remaining hidden.
It’s a similar technique to the once used to create a French knot, just without the fabric.
Wrap around the needle
Take the end of the thread (furthest from the needle) and wrap it round the needle a few times.
Use the thumb and finger of one hand to hold the end against the needle and your other hand to create the wraps.
The more wraps there are, the larger the knot. I find at least four are needed for most fabrics.
Move the wraps
With one hand holding the needle, use the other to hold the wraps together. Then carefully move the wraps down the needle, over the eye and down to the end of the thread.
Pull the knot tight
When the wraps reach the end of the thread, pull them tight and they will form a knot.
Want to practice your quilters knots? Then head over to my shop and browse the kits I have on offer and before you know it you’ll be knotting and stitching like a pro!
Enjoyed this blog post? I share embroidery tips and a free embroidery pattern in my monthly newsletter. Sign up here to receive the newsletter on the 1st of each the month.